服务热线

010-6756 6879 
网站导航
主营产品:
高压喷淋清洗线
当前位置:主页 > 产品展示 > 清洗设备 > 高压喷淋清洗线 >

高压喷淋清洗线

简要描述:

超声波 通过式 发动机总成、阀体 高压喷淋清洗线 Ultrasonic through type engine assembly, valve body high pressure spray cleaning line 产品功能:由超声波清洗系统 、高压喷淋系统和热风烘干系统组成,...

详细介绍
 超声波通过式发动机总成、阀体高压喷淋清洗线
 Ultrasonic through type engine assembly, valve body high pressure spray cleaning line
 
产品功能:由超声波清洗系统、高压喷淋系统和热风烘干系统组成,清洗液多级过滤装置,磁力排屑、平网式过滤机及袋式过滤装置,使清洗液持续保持高清洁度,工件清洗精度高,并能持久稳定。
Product function: it is composed of ultrasonic cleaning system, high-pressure spray system and hot air drying system, multi-stage filter device, magnetic chip removal device, flat screen filter and bag filter device, so that the cleaning solution can keep high-definition cleanliness, the workpiece cleaning precision is high, and it can be stable for a long time.
产品特点:
除上下料外,可自动连续完成整个清洗工艺过程
采用辊道输送模式,工件架在辊道上回转运行
各工位同步定位清洗干燥,设置专门喷嘴清洗吹干特殊要求的接线口及盲孔
每个工位之间有气动密封门隔离,防止清漂洗工位间相互干扰
低压和高压喷淋系统,清洗及漂洗为独立循环系统,储水箱为两个独立的箱体,清洗和漂洗工作时循环水分别回流到各自储液箱内
清漂洗液分别由电加热器加热,采用PID数显温控表控制,工艺温度可分别自行设定,自动恒温。油水分离与多级循环过滤系统
采用热风循环烘干系统,热风恒温控制,可设定烘干所需温度
整机运行及逻辑互锁由PLC控制,采用触摸屏监控及控制操作
无级变速加电子调速传动系统,让设备操作更方便,随时可根据需要改变工件传输速度
全封闭设计,完整的抽风系统,清洗环境洁净。
适合发动机总成、阀体、变速器等大中型零件的内外表面和小孔的清洗,生产效率高,适于批量生产。
Product features:
In addition to loading and unloading, the whole cleaning process can be completed automatically and continuously
The roller conveying mode is adopted, and the workpiece rack rotates on the roller table
Each working position shall be cleaned and dried synchronously, and special nozzles shall be set to clean and dry the wiring ports and blind holes with special requirements
There is a pneumatic sealing door between each station to prevent mutual interference between cleaning and rinsing stations
Low pressure and high pressure spray system, cleaning and rinsing are independent circulation system, and the water storage tank is two independent boxes. During cleaning and rinsing, the circulating water flows back to the respective liquid storage tanks
The cleaning and rinsing solution is heated by electric heater and controlled by PID digital temperature control meter. The process temperature can be set independently and automatically. Oil water separation and multistage circulating filtration system
The hot air circulation drying system and hot air constant temperature control are adopted to set the required drying temperature
The operation and logic interlock of the whole machine are controlled by PLC and monitored and controlled by touch screen
The stepless speed change and electronic speed control drive system make the operation of the equipment more convenient, and the workpiece transmission speed can be changed at any time according to the needs
 
Full closed design, complete ventilation system, clean cleaning environment.
It is suitable for cleaning internal and external surfaces and small holes of large and medium-sized parts such as engine assembly, valve body and transmission, with high production efficiency and suitable for mass production.

 


产品咨询

留言框

  • 产品:

  • 留言内容:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 详细地址:

上一篇:没有了

下一篇:没有了

推荐产品

北京正盛鸿成电子科技有限公司 版权所有

地址:北京市大兴区黄村镇兴华大街绿地财富中心B座701室Company Address: Rm701, Building B,Greenland Group,Xinghua Street, Daxing District,Beijing, China 电话:010-6756 6879  邮箱:z512008@163.com

关注我们

服务热线

010-6756 6879 

扫一扫,关注我们